Treasure Coast Miata » Spec

Products for:

  • Performance: Spec

View Universal items for: Spec


Browse Products

Sort
View
 
Items 1-60 of 146
Description: Sparco Part # 01606 These hood pins are what we use on the 5X Racing Spec Miata's, mostly because they do not allow you to lose the safety pins! Because the safety pin is integrated on a sliding...More Details »
Condition: New
Price: $50.00

Description: This is a FULL engine gasket kit and includes all the gaskets and seals you'll need to reassemble your engine. These are factory MAZDA parts. Beware of using aftermarket gaskets and seals. They...More Details »
Condition: New
Price: $572.90
Qty:

Description: Please note; Exedy and all the suppliers are out of masters until Mid October. If you place an order and want to wait for the Exedy parts you must state that in the check out comments. Otherwise...More Details »
Condition: New
Price: $25.00
Qty:

Description: Please note; Exedy and all the suppliers are out of slaves until Mid October. If you place an order and want to wait for the Exedy parts you must state that in the check out comments. Otherwise you...More Details »
Condition: New
Price: $16.25
Qty:

Description: 1990 - 2005 Miata Ball Joint/Tie Rod refresh package. The Miata boots are notorious for wearing out and it isn't long before the lower ball joints and tie rods follow. Now you can get all the items...More Details »
Condition: New
Price: $70.00

mazdaspeed motor
Description: These are a must have for all of our performance Miata vehicles. Fits left or right side. The soft factory mounts allow the weight of the motor to tilt back and forth during hard cornering. This...More Details »
Condition: New
Price is for one mount.
Price: $113.00
Qty:

Description: '90 - '05 Miata Ball Joint/Tie Rod Boot Replacement Kit The miata boots are notorious for wearing out and it isn't long before the lower ball joints and tie rods follow. Now you can get all the...More Details »
Condition: New
Price: $63.50

Description: Treasure Coast Miata has put together a Miata Gauge kit using two Auto Meter Phantom series 2 1/16" gauges, oil pressure and water temperature. These are the life blood of your Miata and you need...More Details »
Condition: New
Price: $287.75
Qty:

Description: Legal for SCCA and NASA Spec Miata! Highly popular for aggressive alignments and street, race and drift cars. Looking for more front camber, but are frustrated with slipping bushings or...More Details »
Condition: New
Price: $100.00

Description: These are the most common parts needed to fix your crank key way problem. We have listed All the original Mazda Parts for all the variations possible. Please read carefully all the information...More Details »
Condition: New

Description: OEM Mazda Competition Differential Rubber Mounts are made with 40% stiffer rubber than standard mounts. Fits: '90 - '05. Price is for a set of 2
Condition: New
Price: $235.00

Description: Manufactured by, Paco Motorsports, this brace bolts into your NA/NB Miata under the hood to prevent the firewall from flexing under braking. With this brace installed, your brake pedal feel...More Details »
Condition: New
Price: $70.00
Qty:

Description: The Mishimoto Oil Filter Sandwich Plate Adapters are made with 3 NPT ports to allow you to install an oil temperature sensor, oil pressure sensor, and/or a turbo oil feed. This easy-to-install...More Details »
Condition: New
Price: $66.80
Qty:

Description: New OEM rubber pedal pad pair Mazda Part # B092-43-028A for clutch or brake. Fits '90-'05. Sold as a pair, individual available as well please inquire.
Condition: New
Price: $13.05
Qty:

Description: These 5X racing Nylatron Door Bushings replace the OEM soft rubber door bushings with far superior machined Oil-Impregnated Nylatron plastic design. These are not the same as the common Delrin...More Details »
Condition: New
Price: $51.00
Qty:

Description: '90 - '93 Miata coolant sensor - 8574-18-840. Genuine OEM Mazda part not an aftermarket one.
Condition: New
Price: $41.40
Qty:

Description: OEM MAZDA '90 - '93 Miata Fan Switch, P/N N350-18-840. Genuine OEM Mazda part not an aftermarket one.
Condition: New
Price: $75.40
Qty:

Description: Our favorite Spec Miata parts manufacturer SP Induction Systems has just released their latest one of a kind Spec Miata product, the SP Spin Bracket. The SP Spin Bracket is the part 1.6L Spec Miata...More Details »
Condition: New
Price: $23.70
Qty:

Description: New Mazda OEM Front Bumper Air Guide fits: '90 - '97 Mazda part # NA01-50-A20A
Condition: New
Price: $91.55
Qty:

Description: Brand New tail Light assembly from Mazda. Complete and with a new Tail light gasket. Please select driver or passenger. Mazda part number, NA01-51-180B,170B
Condition: New
Price: $186.50

Description: This is a FULL engine gasket kit and includes all the gaskets and seals you'll need to reassemble your engine. These are factory MAZDA parts. Beware of using aftermarket gaskets and seals. They...More Details »
Condition: New
Price: $504.00
Qty:

Description: Sold as a pair. These fit all '90-'05 Miata's Includes tie rod end with ball joint boots installed Cotter Pin & Castle Nut Sold Separately These Tie Rod Ends came installed on 1993-1994 Miatas...More Details »
Condition: New
Price: $179.70

Description: '90-'05 Mazda Miata transmission seal kit (5 speed) uses all new OEM Mazda gaskets and seals. The kit includes input shaft seal, input shaft seal housing gasket and the rear output shaft seal....More Details »
Condition: New
Price: $35.10

Description: Ultra-Power (or OEM equivalent) Chassis Front Lower Ball Joint Ultra-Power offers a broad range of steering and suspension parts for Asian and European applications. No matter what the service...More Details »
Condition: New
Price: $10.00
Qty:

Description: This is a FULL engine gasket kit and includes all the gaskets and seals you'll need to reassemble your engine. These are factory MAZDA parts. Beware of using aftermarket gaskets and seals. They...More Details »
Condition: New
Price: $504.00
Qty:

Description: This is a FULL engine gasket kit and includes all the gaskets and seals you'll need to reassemble your engine. These are factory MAZDA parts. Beware of using aftermarket gaskets and seals. They...More Details »
Condition: New
Price: $638.00
Qty:

Description: OEM MAZDA '94 - '97 Miata Temp Gauge Switch P/N JE15-18-51X. Genuine OEM Mazda part not an aftermarket one.
Condition: New
Price: $40.40
Qty:

Description: OEM MAZDA '94 - '97 Miata Temp Thermosensor Switch P/N B593-18-840A. Genuine OEM Mazda part not an aftermarket one.
Condition: New
Price: $48.07
Qty:

Description: Constructed of .040 inch thick aluminum Matte Black Powder Coat Finish Special non-abrasive screws included Made in the USA Note: it will be necessary to bend the plates a little to customize...More Details »
Condition: New
Price: $53.50
Qty:

Description: Treasure Coast Miata is happy to offer a Mazda Gasket kit for the '99 - '00 engine. This is a FULL engine gasket kit and includes all the gaskets and seals you'll need to reassemble your...More Details »
Condition: New
Price: $665.00
Qty:

Description: New Mazda OEM Front Bumper Air Guide fits: '99 - '05 Mazda P/N NC10-50-A21A
Condition: New
Price: $108.00
Qty:

Description: You spent a lot of time and money on your race car, so why stare at homemade switch panel? -High-tech LED rocker style switches are dust, weather resistant and feature a wide-profile face for...More Details »
Condition: New
Price: $220.00

Description: '99 - '05 New Mazda Shock Top Hats, set of (4). Can be used with '90 - '97 cars. Mazda part # NC10-28-340C
Condition: New
Price: $120.74
Qty:

Description: Constructed of .040 inch thick aluminum Matte Black Powder Coat Finish Special non-abrasive screws included Made in the USA Note: it will be necessary to bend the plates a little to customize...More Details »
Condition: New
Price: $53.65
Qty:

Mazda Miata R Package Lip Spoiler
Description: New R Package front bumper lip. Fits "90 - '97. Beware of the cheap e-bay Chinese imitations. They are very low quality and don't fit well especially at the passenger end of the lip. The original...More Details »
Condition: New
Not Available
expected stocking date is end of September. Please inquire.
Ships UPS. Unfortunately Canadian customers will be subject to additional charges. Please contact us for a quote.
Price: $169.00
Description: The 5XR Grip Plate is a specially designed floorpan that is specially designed for a Mazda Miata (will fit other cars with similar dimensions) What does it do? The 5XR Grip Plate is a flat,...More Details »
Condition: New
Limited Supply: Only 0 Left!
unavailable as of 4/8/2022, please inquire.
Price: $65.50
1990 Miata short nose crank, Harmonic balancer bolts
Description: These are the 4 Mazda specialty graded bolts (hardened) that hold the Harmonic balancer to the timing pulley on the 1990 Miata short nose crank. (1990 up to VIN 209447). You will receive 4 bolts....More Details »
Condition: New
Price: $22.00
Qty:

Description: The radio delete plate for 1990-1996.5 Mazda Miata is one of many parts that have passed our rigorous long term track testing and has proven itself ready for all you crazies out there! Our radio...More Details »
Condition: New
Price: $37.85
Qty:

Description: Kit includes 2 rack spacers and all hardware needed to install onto existing sub-frame. No modifications needed Fits all 1990-1997 Mazda Miata's. Will NOT fit 1999-2005 Miata's Raises steering...More Details »
Condition: New
Price: $75.00

Description: This is the ultimate lightweight front tow hook. Made from Aluminum and works in conjunction with the stock OEM tow hook. There are plenty of tow hooks on the market, but all of them require you...More Details »
Condition: New
Limited Supply: Only 0 Left!
Price: $65.00
1991 - 2005 Miata long nose crank, Harmonic balancer bolts
Description: These are the 4 Mazda specialty graded bolts (hardened) that hold the Harmonic balancer to the pulley boss on the 1991 - 2005 Miata long nose crank. (1991 - 2005 after VIN 209447). You will receive...More Details »
Condition: New
Price: $21.58
Qty:

Description: Kit includes one radio delete plate in Matte black powder coat and mounting hardware, and is designed to fit all 1999-2005 Mazda Miata dashboards with minor modifications as outlined in the...More Details »
Condition: New
Limited Supply: Only 0 Left!
Price: $50.50
Description: Kit includes:•4 each - 5" long anodized black aluminum adjustment sleeves •4 each - Spring perch adjusters for 2.5" race springs
Condition: New
Price: $160.00
Qty:

Description: Hard to find European 2001 - 2005 Miata Fog Light delete covers. Replace those non functioning fog lights with this stylish delete covers. They come as pairs and just snap into place! Commonly used in Spec Miata and many track cars.
Condition: New
Price: $55.40
Qty:

Description: These racing lug nuts work with a 17mm socket for easier access on wheels with smaller stud mounting holes. The open ended design works with all length wheel studs, stock or extended. The 12 x 1.5...More Details »
Condition: New
Price: $43.00
Qty:

Description: What we are offering here is a factory, OEM Mazda fuel pressure regulator modified to be made adjustable by adding 5X Racing's custom fabricated mechanism. No core required, we totally transform...More Details »
Condition: New
Not Available
Please inquire about availability
Price: $250.00
Description: This product comes in two different versions. One for racecars that use hood pins to latch the hood and have the factory hood latch removed, and one that has a cutout for the factory hood latch for...More Details »
Condition: New
Not Available
9/22/20, out of stock for the near future. Please inquire.
Price: $35.00
Description: These competition style bronze bushings will give you that firm feel shifting you have been looking for. They fit: All Miata and MX-5 5-Speed's from 1990-2005 and 1999-2005 6-Speed Miata! Mazda...More Details »
Condition: New
Price: $25.00

Description: The 5X Racing Version 2 has arrived! Dyno tested and proven to add 5+ HP and 6+ ft/lbs of TQ! The original wheel had an adjustment range from 10 degrees BTDC (oem locked setting) to 16 degrees...More Details »
Condition: New
Price: $38.00
Qty:

Description: In our never ending quest to figure out what parts our Spec Miata race cars need, and what parts are not already out in the industry, we located this simple yet very effective mount for any type of...More Details »
Condition: New
Please Call for Availability
5/4/20, part currently undergoing a redesign. Please call about availability.
Call For Price: 772-263-3142
Description: the little brother of the 5X Grip Plate, is the 5X Racing Tread Plate. This plate is lightweight aluminum, designed to fit perfectly in the floor pan of an un-carpeted Miata, provides a nice solid...More Details »
Condition: New
Please Call for Availability
On back order as of 3/27/22, please inquire
Call For Price: 772-263-3142
Description: The Mishimoto water temperature sensor adapter allows you to place the water temperature sensor directly within the radiator hose. By placing the sensor in the hose and thus directly in the path of...More Details »
Condition: New
Price: $28.60

Description: Introducing the all new complete brake packages from Treasure Coast Miata. These kits will include everything you need to fully service your Miata brakes, with options ranging from the budget...More Details »
Condition: New
Limited Supply
Price: $155.00

Description: Replacement ACT 4-pad solid hub race clutch disc for ACT kit: ZM1-HDR4 This is the same clutch disc we use in our Spec Miata race cars and recommend for your Spec Miata race car. It is class...More Details »
Condition: New
Price: $135.00
Qty:

Description: This is what we use in our Spec Miata race cars and recommend for your Spec Miata. It is necessary to have a solid hub clutch disc for lightweight and the clutch chatter is almost non-existent on...More Details »
Condition: New
Price: $140.00
Qty:

Miata ACT 4 Puck Sprung Race Clutch Disk 4224205
Description: ACT Race discs are designed to exceed your high performance standards. Employing solid engineering principals, ACT coordinates a tested balance of clamp load, friction, and pedal feel, plus other...More Details »
Condition: New
Price: $163.75

Description: ACT 1990-2005 Mazda Miata Clutch Pilot Bearing. The Pilot bearing should be replaced whenever your clutch is replaced.
Condition: New
Price: $8.00
Qty:

Description: 1990-2005 Mazda Miata Clutch Release Bearing
Condition: New
Price: $45.75
Free Shipping!
Qty:

Description: If you are searching the Spec Miata rules for clutch kits, the rules translation can be a little tricky. The rule books list Mazdaspeed part number 0000-02-5401-SS for an ACT pressure plate, but do...More Details »
Condition: New
Price: $428.00
Qty:

Description: If you are searching the Spec Miata rules for clutch kits, the rules translation can be a little tricky. The rule books list Mazdaspeed part number 0000-02-5404-AC for an ACT pressure plate, but do...More Details »
Condition: New
Price: $473.00
Qty:

Items 1-60 of 146

View Universal items for: Spec