99' - 05' (Sport Size) Miata Complete Brake Package(s)

Dynamic Friction OEM equivalent pads

The DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.

All DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop.

Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.

An underlayer promotes better friction to plate adhesion, minimizing noise and acts as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.

HybriDynamic Formulation
Excellent fade resistance
Extremely low dust characteristics
100% Copper Free Eco Friendly Formulation [California/Washington 2025]
Formulated for passenger vehicles and light duty trucks
Stable friction performance across a wide temperature range

OEM Technology with Noise Reduction & Performance Features
Chamfered and Slotted (where applicable) to reduce noise when braking
Scorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop
Positive mold to promote consistent friction material density

100% Copper Free
DFC 4000 HybriDynamic Brake Pads are environmentally friendly and adhere to the low copper requirements under California and Washington restrictions for 2021 / 2025.

Durago OEM equivalent rotors

Quiet and Smooth Stops. Each rotor casting is sent to our state of the art machining facilities, where it is processed to the
tightest tolerances available in the market today. Then, the rotor is prepared with a non-directional finish to promote a faster and more even brake pad bed-in, along with quieter and smoother stops.

Meets OE Specifications
After all of the machining processes are completed, each rotor passes a 100% inspection station that measures all critical attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free.

Product Features:

Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability.
Original Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.
Provides superior corrosion protection over zinc / conventional painting
CNC-machined to the tightest tolerances.
100% precision cut and mill-balanced for smoother stopping and zero vibration at any speed.
Non-directional finish to promote faster break-in and smoother stops.
Designed to meet the same form, fit, and function as OEM brake rotors.
Ready to Install - No additional pre-degreasing preparation needed (saves time and money during installation process).
Quality tested to ensure long-lasting performance.
New in Box, Ready to Install, No Modifications Required.

Pagid Premium pads 

 Pagid's Silver Ceramic brake pads have been developed and tested to surpass OE quality standards. Extensive testing shows that the Ceramic Silver NAO friction material meets the highest technical demands when it comes to safety, performance, comfort and durability.

Features:
Long service life, low wear rate
Stable and high friction coefficient
Minimal brake dust accumulation
Excellent technology and quality
100% asbestos-free pad material
Maximum comfort, high safety level
Perfect brake control

Dynamic Friction Premium rotors 

 Dynamic Friction Premium GeoSpec coated rotors are formulated with the G3000/G11H18 cast iron specification, DFC Premium Brake rotors are engineered to match OEM specifications for durability, reliability, and stability. Each rotor casting is sent to our state of the art machining facilities, where it is processed to the tightest tolerances available in the market today. Then, the rotor is prepared with a non-directional finish to promote a faster and more even brake pad bed-in, along with quieter and smoother stops. Finally, all vented rotors are 100% inspected for balance and are corrected if necessary with our state of the art electronic mill-balance process.

Product features;
Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability.
Original Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.
CNC-machined to the tightest tolerances.
100% precision mill-balanced for smoother stopping and zero vibration at any speed.
Non-directional finish to promote faster break-in and smoother stops.
Designed to meet the same form, fit, and function as OEM brake rotors.
Quality tested to ensure long-lasting performance.
New in Box, Ready to Install, No Modifications Required.

Stoptech street and track capable pads and rotors

StopTech Street Performance Brake Pads features StopTech's high-temperature compound that is formulated for consistent performance and even pad wear. The pad surface is scorched, so you get the high-performance bite in both hot and cold temperatures. These brake pads are engineered to meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions. They combine the benefits of premium street brake pads with aggressive friction formulas suitable for track day and autocross use. Plus, these brake pads boast a low-dust formulation that keeps your wheels cleaner than most performance pads. StopTech brake pads are quiet, too. Thanks to a perfect factory fit and the OEM-style shims, noise caused by pad vibration is virtually eliminated. And, the factory fit also makes for a super-easy do-it-yourself installation.