New Light Weight Miata Race Hard Top fits NC 2006-2015

Treasure Coast Miata is happy to announce that the new fiberglass OEM replica NC (2006+) Light Weight Race Hard top for race cars is now available. It comes as shown without any rear glass or window/trim molding and is ready for paint. The top weighs in at just 14 lbs and the cost is only $920 + shipping. These tops are available in either white gel coat only. A street version is now available also (see below). It is manufactured in the USA by CCP Fabrication. Please note, all fiberglass parts take some customer finishing for final fit to the vehicle.

Please read the following details so your well informed about this top;

The external dimensions are the same as the factory top, but that is where the similarities end. If your looking at purchasing this top because you want a factory top but they are expensive and hard to find, then our Race Hard Top might not be for you, please read on. Our top was designed with the upmost lightness in mind.

It doesn't have a very substantial inner structure. It doesn't use latches, it uses brackets, nuts and bolts. Therefore it takes longer to mount and unmount this top. It doesn't use the Frankenstein bolts.

Because of the size, the light weight race top has to ship freight. We use a flat rate for shipping (US 48 states only) all other locations will have an additional charge. This is one of your options during check out. We ship only to the continental United States (48 states). Please note the use of a business address saves $100. Many customers have contacted their local pack and ship store and used them as a business shipping address. There is a $70 packaging (handling) fee We can also ship your buddy a second one (same box) with very little additional shipping! Please contact us about this. There is no shipping out side the US. Canadian customers should consider a US based ship store, others can arrange US based brokers for deliveries. Please note any order cancellations will have a 5% credit card/PayPal charge as these are not refundable to us. Also we cannot be liable for any loss or damage to any shipment that goes overseas. We also have a "local pick up" option.

We have developed a Street "kit" that includes all you need to make the race top streetable. This is a DYI kit only. We will happily ship it to your race shop or body shop of your choice. The street kit does an effective job of keeping out rain, wind and dust. It will generally ship with the Race Hard Top. These are the details of the street kit;

It comes with a precut, bolt in lexan window that is scribed for a painted border and marked for the holes to be drilled. There is an optional tinted lexan window that is "mid" density. You cannot use tint film on lexan, it will create bubbles. It includes seals for the window and rear deck area. Trim for the cut edge of the lexan window and to finish off the rear deck area of the top. It includes the brackets to bolt the window at the front of the car and turnbuckles at the "B" pillar to help compress the rear deck seal. Rear window Stainless Steel mounting hardware. Optional Black Oxide bolts are available Side window seals. There is a YouTube video on the street kit ad that shows how to install it. The video is of the '90 - '05 top but the process is essentially the same. The street kit can be found here;

These tops are built to order and usually take approx. 2 - 4 weeks to manufacture as of 1/30/2023. Any order cancellations will be subject to a 5% cancelation fee. This is to cover un-refundable credit card/PayPal fees.

You will receive freight tracking once the freight carrier has picked up the box.

All freight is insured, however you should inspect the box for damage before the driver leaves. If damage is suspected, open the box in front of the truck driver and if damage is noted you must mark that on the receipt he will be asking you to sign.

If you have any questions, please feel free to give us a call
Availability: These items and are made to order, so please allow approx. 2 - 4 weeks for manufacture as of 9/30/23
Shipping: We charge a flat rate shipping for freight, however we reserve the right to charge extra for highly congested or remote destinations as these are normal charges in the freight industry. There is a $70 packaging (handling) fee.
Pricing: $1,050.00

Customize Your Item

- Upgrade to black SS bolts -
 * required
- Freight Type -
 * required
- Are you keeping your convertible -
 * required
- Addition of the Street Kit -
 * required




Shipping Information

  • Item Requires Shipping
  • $70.00
  • This item ships in its own box.
  • This item will require a special quote for shipping charges.
  • We charge a flat rate shipping for freight, however we reserve the right to charge extra for highly congested or remote destinations as these are normal charges in the freight industry. There is a $70 packaging (handling) fee.