Additional Images

New '90-'93 Mazda Miata Premium Gates and Mazda Timing Belt & Water Pump Replacement Kit

Timing belt replacement on your Miata is one of those critical "hidden" maintenance items. Replacing your timing belt (your water pump is recommended also) at regular 60k miles is something Mazda highly recommends to keep your Miata running. This kit will supply the DIY Miata mechanic with everything they'll need to completely service the front of their Miata's engine when replacing a timing belt and water pump including the often overlooked tensioner pulleys, Cam and Front Main Seals. This kit uses high quality OEM and Gates Automotive(best aftermarket replacement brand next to OEM Mazda) parts. If you haven't changed your valve Cover Gasket and Cam Angle Sensor O-ring recently then you can add them to the kit. We insist on using an OEM Mazda Valve cover gasket and CAS O-ring because the aftermarket replacements are very poor quality, and we've had problems with them sealing on our cars in the past.

Please customize your kit using the dropdown menu. Check your vin number and please select if your car is before Vin #209445 or after Vin #209445.

FULL Kit fits 1990-1993 Miata with Power Steering and Air Conditioning and includes:
•1 - Gates 90-93 Mazda MX-5 Miata Micro-V Belt for A/C and P/S
•1 - Gates 90-93 Mazda MX-5 Miata Micro-V Belt for W/P and ALT
•1 - Gates 90-93 Mazda Miata 1.6L Stock Replacement Timing Belt Component Kit (includes timing belt, tensioner pulleys and replacement spring)
•2 - OEM 90-93 Miata Cam Seals (2 required and included)
•1 - OEM 90-93 Miata Front Crankshaft Main Seal
•1 - Gates 90-93 Mazda Miata Water Pump Kit 42131 (STAMP STEEL IMPELLER) (water pump, 2 Gates paper Water Pump Gaskets, and Water Pipe O-Ring included within Water Pump Kit)

OEM Valve Cover Gaskets, Cam Angle Sensor O-rings, steel Mazda water pump gaskets and timing cover gasket sets etc. are an add on option if you haven't replaced yours recently

Our oil seal install tool kit is made for ease of seal installation without damaging the fragile OEM oil seals that come in the timing belt kit and assure a proper and correct install due to carefully designed tolerances in our 3d printed tools. (printed inhouse)
Pricing: $208.21

Customize Your Item

- -
 * required
- Add OEM Valve cover gasket -
 * required
 * required
- -
 * required
- Thermostat -
 * required
- Thermostat Gasket -
 * required
- Mazda OEM Timing Cover Gasket Ki -
 * required
- -
 * required
- Wix Air Filter -
 * required
- Wix Fuel Filter -
 * required


Shipping Information

  • Item Requires Shipping
  • 7.0 lbs.
  • W15.0000” x H13.0000” x L7.0000”