Treasure Coast Miata is happy to offer this new light weight (only 12 LBS) race hard top. Made of fiberglass it is a replication of the original hard top. The basic top or "Racer Model" is available for $710. The top comes as shown without any rear glass or window/trim molding and is ready for paint. It comes in black gel coat only. A street version is now available also (see below).
Please read the following details so your well informed about this top;
The external dimensions are the same as the factory top, but that is where the similarities end. If your looking at purchasing this top because you want a factory top but they are expensive and hard to find, then our Race Hard Top might not be for you, please read on. Our top was designed with the upmost lightness in mind.
It doesn't have a very substantial inner structure.
It doesn't use latches, it uses brackets, nuts and bolts. Therefore it takes longer to mount and unmount this top.
It doesn't use the frankenstein bolts.
Because of the size, the light weight race top has to ship freight. We use a flat rate for shipping (US 48 states only) all other locations will have an additional charge. This is one of your options during check out. We ship only to the continental United States (48 states). Please note the use of a business address typically saves $100. Many customers have contacted their local pack and ship store and used them as a business shipping address. There is a $50 packaging (handling) fee. We can also ship your buddy a second one (same box) with very little additional shipping! Please contact us about this.
We have developed a Street "kit" that includes all you need to make the race top streetable. This is a DYI kit only. We will happily ship it to your race shop or body shop of your choice. The street kit does an effective job of keeping out rain, wind and dust. It will generally ship with the Race Hard Top. These are the details of the street kit;
It comes with a precut, bolt in lexan window that is scribed for a painted border and marked for the holes to be drilled.
There is an optional tinted lexan window that is "mid" density. You cannot use tint film on lexan, it will create bubbles.
Stainless Steel hardware is included to bolt in the window. Optional Black Oxide bolts are available
It includes seals for the window and rear deck area.
It includes trim for the cut edge of the lexan window and to finish off the rear deck area of the top.
It includes the brackets to bolt the top at the front of the car and turnbuckles at the "B" pillar to help compress the rear deck seal.
It DOES NOT include side window seals. The top is designed for you to be able to re-use the 3 piece side window seals, brackets and hardware from your donor soft top. If you do not have these available we do have them listed in the web site and we also have 1 piece seals with 3M adhesive available that you can use.
There is a YouTube video on the street kit ad that shows how to install it. The street kit can be found here, please review the details and watch the video;
Lightweight Hardtop Street "kit"
These tops are built to order and usually take 2 - 4 weeks to manufacture.
You will receive freight tracking once the freight carrier has picked up the box.
All freight is insured, however you should inspect the box for damage before the driver leaves. If damage is suspected, open the box in front of the truck driver and if damage is noted you must mark that on the receipt he will be asking you to sign.
If you have any questions, please feel free to give us a call!