New Light Weight Miata Race Hard Top fits 1990 - 2005
Treasure Coast Miata is happy to offer this new light weight (only 15 LBS) race NA & NB Hard Top. It is manufactured in the USA by CCP Fabrication. Please note, all fiberglass parts take some customer finishing for final fit to the vehicle. The hard Top, made of fiberglass, is a replication of the original hard top. The basic top or "Racer Model" is available for $850. The top comes as shown without any rear glass or window/trim molding and is ready for paint. It comes in white gel coat only. A street version is now available also (see below). Please read the following details so your well informed about this top; The external dimensions are the same as the factory top, but that is where the similarities end. If your looking at purchasing this top because you want a factory top but they are expensive and hard to find, then our Race Hard Top might not be for you, please read on. Our top was designed with the utmost lightness in mind. It doesn't have a very substantial inner structure. It doesn't use latches, it uses brackets, nuts and bolts. Therefore it takes longer to mount and unmount this top. It doesn't use the Frankenstein bolts. Because of the size, the light weight race top has to ship freight. We use a flat rate for shipping (US 48 states only) all other locations will have an additional charge. This is one of your options during check out. We ship only to the continental United States (48 states). Please note the use of a business address saves $100. Many customers have contacted their local pack and ship store and used them as a business shipping address. There is a $70 packaging (handling) fee. We can also ship your buddy a second one (same box) with very little additional shipping! Please contact us about this. There is no shipping out side the US. Canadian customers should consider a US based ship store, others can arrange US based brokers for deliveries. Please note any order cancellations will have a 5% credit card/PayPal charge as these are not refundable to us. Also we cannot be liable for any loss or damage to any shipment that goes overseas. We also have a "local pick up" option, top in Port Richey FL (45 min north of Clearwater) and Street Kit in Stuart FL We have developed a Street "kit" that includes all you need to make the race top street-able. This is a DYI kit only. We will happily ship it to your race shop or body shop of your choice. The street kit does an effective job of keeping out rain, wind and dust. It will generally ship with the Race Hard Top. These are the details of the street kit; The street kit comes with a precut, bolt in Lexan window that is scribed for a painted border and marked for the holes to be drilled. There is an optional tinted Lexan window that is "mid" density. You cannot use tint film on Lexan, it will create bubbles. Stainless Steel hardware is included to bolt in the window. Optional Black Oxide bolts are available It includes seals for the window and rear deck area. It includes trim for the cut edge of the Lexan window and to finish off the rear deck area of the top. It includes the brackets to bolt the top at the front of the car and turnbuckles at the "B" pillar to help compress the rear deck seal. It DOES NOT include side window seals. There are several options available for side window seals. The most universal and simple option is the economical aftermarket 1 piece seals with 3M adhesive. You can re-use the 3 piece convertible OEM side window seals, brackets and hardware from your donor soft top. If you do not have these available we have them as an option. We also have optional 1 piece NEW OEM Mazda hard top seals that can be used with your 3 piece convertible SS brackets for the most effective sealing option. Please note the OEM bracket and seal options may require some additional fitment work. We currently have several CLEAR windows with possible "light" scratches in them from handling. They come with protective film on both sides. These scratches are evident in the protective coating and may or may not have made it into the Lexan. These are available as a $40 discounted window kit. Great for race cars! There is a YouTube assembly video on the street kit ad that shows how to install it. The street kit can be found here, please review the details and watch the assembly video;
Availability: These items and are made to order, so please allow approx. 2 - 4 weeks weeks for manufacture as of 1/30/23
Shipping: We charge a flat rate shipping for freight, however we reserve the right to charge extra for highly congested or remote destinations as these are normal charges in the freight industry. There is a $70 packaging (handling) fee.
- These items and are made to order, so please allow approx. 2 - 4 weeks weeks for manufacture as of 1/30/23
- Item Requires Shipping
- This item ships in its own box.
- This item will require a special quote for shipping charges.
- We charge a flat rate shipping for freight, however we reserve the right to charge extra for highly congested or remote destinations as these are normal charges in the freight industry. There is a $70 packaging (handling) fee.